GE CRxVision Operating Manual page 41

13. Remove the jammed image plate.
Note:

Never use force to clear the jammed image plate. If it is not possible to
gently remove the image plate, call your local service organization.

Make sure not to bend the image plate excessively when removing it from
the CRxVision.

After a jam, the image plate can be used again if it is not damaged.

After removing a jammed image plate, erase the image plate before the
next exposure.
14. Mount in reverse order.
15. Verify the re-mounting by scanning an unexposed image plate.
CRxVision Operating Manual V1.2 41