Compatibility
The CRxVision must only be used in combination with other equipment or components if
these are expressly recognized by GE as compatible.
Changes or additions to the equipment must only be carried out by persons authorized to do
so by GE. Such changes must comply with best engineering practices and all applicable laws
and regulations.
Accessory equipment connected to any interfaces must be certified according to the
respective IEC standards. Furthermore, all configurations shall comply with the valid version
of the system standard. Everybody who connects additional equipment to the signal input
part or signal output part configures a system, and is therefore responsible that the system
complies with the requirements of the valid version of the system standard. If in doubt,
consult your local service organization
Compliance
General
The product has been designed in accordance to DIRECTIVE 2006/95/EC (Low Voltage
Directive) and DIRECTIVE 2004/108/EC (Electromagnetic Compatibility) of the EUROPEAN
PARLIAMENT and of the COUNCIL.
ISO 9001: 2008
ISO 14971, SEMI S10-1296, IEC 61508
Safety
IEC 61010-1: 2010 + Corr:2011
UL 61010-1 2nd Ed.
CAN/CSA-C22.2 No. 61010-1-12
Laser Safety
IEC 60825:1993 + A1:1997 + A2:2001
IEC 60825-1:2007, EN 60825-1:2007
Electromagnetic Compatibility
IEC 61326-1:2006
FCC Rules 47 CFR part 15 subpart B
CAN/CSA-IEC 61000-6-2-08 (R2013)
CAN/CSA-C61000-3-3-06 (R2011)
CRxVision Operating Manual V1.2
15