Mode Setting Items - Toshiba B-EP Series Key Operation Specification

O N L I N E

5.13.2 Mode Setting Items

For details, refer to the section, "6.6.3 Various Parameter Settings" in Chapter "6. SYSTEM
MODE" (for system administrators).
Print command
setting
(PCL Mode)
Head division setting
(HEAD DIV)
B-SP series compatibility mode
setting
(B-SP MODE)
Linerless setting
(LINERLESS)
Print type setting
(PRINT TYPE)
Post-print stop position setting
(PAPER STOP)
Back feed restriction setting
(BF.RESTRICT)
Strip issue back feed setting
(PEEL BF.)
Item
language TPCL
B-EP2:
B-EP4:
OFF (B-SP series compatibility mode is disabled.)
OFF (Linerless setting is disabled.)
AUTO (automatic selection from BATCH or STRIP)
CUT (Stop at the cut position)
* Supported on V1.0E or later.
ON (Back feed restricted)
* Supported on V1.0E or later.
OFF (No back feed allowed)
* Supported on V1.0E or later.
(29) The printer returns to the same state as when
the power is turned off and on again.
AUTO1 (automatic selection from none, 2 or 3 division)
AUTO1 (automatic selection from none, 2, 3 or 6 division)
- 17 -
Default