Power Save Mode - Toshiba B-EP Series Key Operation Specification

8. POWER SAVE MODE

This section described printer operations in power save mode.
8.1 SHIFTING TO POWER SAVE MODE
When communication, key operations and cover open/close operations are not performed in a certain
period of time to shift to power save mode, the printer enters power save mode.
When the printer enters power save mode, the SLEEP icon appears on the LCD.
8.2 WHEN A WIRELESS LAN MODULE IS CONNECTED
When a wireless LAN module is connected, "Power Save Mode Setting" inside the module is switched
from "No Power Save" to "Auto Power Save" after the printer enters power save mode.
8.3 PRECAUTIONS
The printer does not enter power save mode under any of the following conditions.
When AC power is supplied (the printer does not enter this mode regardless of battery charging
status).
When any error is displayed.
When the "BASIC interpreter" runs.
When the printer is in system mode.
When the printer pauses.
- 219 -