Safety; Software Version; Showroom Programme; Factory Default - Miele H 7260 BP Operating And Installation Instructions

Settings

Safety

Sensor lock
The sensor lock prevents the cooking
programme being switched off by
mistake or settings being changed.
Apart from the  On/Off sensor
control, the activated sensor lock
prevents the sensor controls and fields
in the display from working for a few
seconds after a programme has been
started.
–
On
The sensor lock is active. Touch the
OK sensor control for at least
6 seconds to deactivate the sensor
lock for a short period of time.
– Off
The sensor lock is deactivated. All
sensor controls react again to touch
as normal.
System lock 
The system lock prevents the oven
being switched on by mistake.
The minute minder can still be used
when the system lock is active.
The system lock will remain activated
even after a mains outage.
–
On
The system lock has been activated.
Before you can use the oven, touch the
OK sensor control for at least
6 seconds.
– Off
The system lock is deactivated. You
can use the oven as normal.
40

Software version

The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.

Showroom programme

This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode active. Appliance heating off
will appear when you switch the oven
on.
– On
Touch the OK sensor control for at
least 4 seconds to activate demo
mode.
– Off
Touch the OK sensor control for at
least 4 seconds to deactivate demo
mode. You can use the oven as
normal.

Factory default

– Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
– Recommended temps.
Any recommended temperatures that
have been changed will be reset to
the factory default settings.