Selecting A Function Or Operating Mode; Entering Numbers - Miele H 7260 BP Operating And Installation Instructions

Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g.
are located above the display (see
"Controls" and "Settings").
 Touch the sensor control for the
desired function.
The sensor control on the fascia panel
lights up orange.
 For functions and operating modes:
set values such as the temperature.
 Under
Further : scroll through the
lists until you reach the desired menu
option.
 Confirm with OK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
 Touch the sensor control of the new
function or operating mode.
 Select
Change function?
with OK, if required.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under Further , scroll through the
lists until you reach the desired menu
option.
)
Further
and confirm
Using the appliance

Entering numbers

Numbers that can be changed are
highlighted.
 Touch the  or  arrow buttons or
swipe to the right or left in the
       area until the desired number
is highlighted.
Tip: If you press and hold an arrow
button, the numbers continue scrolling
automatically until you release the arrow
button.
 Confirm with OK.
The changed number is now saved.
This will take you back to the previous
menu.
21