Installing Capmonitor - NEC Express5800/A1040b User Manual

3.1.2

Installing capmonitor

1. Login to the target machine as a root user.
2. The most recent version of RPM are available for download from the following website.
http://www.58support.nec.co.jp/global/download/index.html
3. Install capmonitor RPM package of Machine Check Monitoring Service using rpm command.
# rpm -ivh mcl-capmonitor-2.4-2.12.el6.x86_64.rpm
Preparing...
1:mcl-capmonitor ######################################## [100%]
Starting capmonitor daemon[ OK ]
Note: acpi_call must be installed before installing capmonitor.
If capmonitor is installed while acpi_call has not been installed, the following message
is output and installation of capmonitor fails.
# rpm -ivh mcl-capmonitor-2.4-2.12.el6.x86_64.rpm
error: Failed dependencies:
mcl-acpicall is needed by mcl-capmonitor-2.4-2.12.el6.x86_64
4. Confirm that capmonitor RPM package of Machine Check Monitoring Service is installed
correctly. The following is displayed when installation completes successfully.
# rpm -qa | grep capmonitor
mcl-capmonitor-2.4-2.12.el6.x86_64
5. Check if capmonitor is started normally. If the following is displayed, capmonitor is started
normally.
# ps aux | grep monitor
root 6044 0.0 0.0 4068 324 ? Ss 06:18 0:00 /opt/nec/capmonitor/capmonitor
6. Installation of package may not complete if the following message is displayed. Repeat from
Step 3 according to "Solution".
Error message
Solution
Error message
Solution
######################################## [100%]
package mcl-capmonitor-2.4-2.12.el6.x86_64 is already installed
Uninstall capmonitor, and install it again.
error: unpacking of archive failed
on file: cpio: write failed - No space left on device
Disk space is insufficient. Increase free space, and install it again.
8