Installation And Configuration; Installation; Installing Acpi_Call - NEC Express5800/A1040b User Manual

3.

Installation and Configuration

This section describes how to install, configure, and start the service of Machine Check Monitoring
Service.
3.1

Installation

Machine Check Monitoring Service is provided as RPM package. Install it by using rpm command as
shown below:Install packages acpi_call, capmonitor, and mcemonitor in order.
3.1.1

Installing acpi_call

1. Login to the target machine as a root user.
2. The most recent version of RPM are available for download from the following website.
http://www.58support.nec.co.jp/global/download/index.html
3. Install acpi_call RPM package of Machine Check Monitoring Service using rpm command.
# rpm -ivh mcl-acpicall-2.4-3.01.2.6.32.504.23.4.el6.x86_64.rpm
Preparing...
1:mcl-acpi_call ########################################## [100%]
Starting acpi_call driver[ OK ]
4. Confirm that acpi_call RPM package of Machine Check Monitoring Service is installed
correctly. The following is displayed when installation completes successfully.
# rpm -qa | grep acpicall
mcl-acpicall-2.4-3.01.2.6.32.504.23.4.el6.x86_64
5. Check if acpi_call driver is started normally. If the following 3 acpi_call are displayed,
acpi_call driver is started normally.
# lsmod | grep acpi
acpi_clpcall 6897 0
acpi_capcall 6897 0
acpi_mcecall 6897 0
6. Installation of package may not complete if the following message is displayed. Repeat from
Step 3 according to "Solution".
Error message
Solution
Error message
Solution
########################################## [100%]
package mcl-acpicall-2.4-3.01.2.6.32.504.23.4.el6.x86_64 is already installed
Uninstall acpi_call, and install it again.
error: unpacking of archive failed
on file: cpio: write failed - No space left on device
Disk space is insufficient. Increase free space, and install it again.
6