Fault Diagnosis; Error Codes - Mira Platinum Installation Manual

Fault Diagnosis

Error Codes

A specific problem relating to the electronic function of the shower will result
in an error code being displayed on the control.
Error Code Number Not Previously Described
Over Temperature at Control Sensor
1. Turn Digital Mixer off for 10 seconds. Turn back on
and allow 10 seconds to reset.
2. Make sure hot and cold inlets are not reversed.
3. Make sure inlet filters and check valve cartridges are
clean.
4. If problem still occurs, make a note of the error code
and contact our Customer Services Team.
Digital Mixer Error
1. Turn Digital Mixer off for 10 seconds. Turn back on and
allow 10 seconds to reset.
2. If problem still occurs, make a note of the error code
and contact our Customer Services Team.
29