Firmware Update - Ubiquiti UniFi Cloud Key Gen2 Plus Quick Start Manual

5. The UniFi Setup Wizard appears. Follow the on-screen
instructions. For step-by-step instructions, refer to the User
Guide, which is available at
www.ubnt.com/download/unifi
After the UniFi Setup Wizard is finished, the UniFi Controller
management interface will appear. Log in with the Admin
Name and Password that you created, and then you can
manage your UniFi devices and view network statistics using
the UniFi Controller management interface.
For information on configuring and using the UniFi Controller
software, refer to the User Guide.

Firmware Update

Note: Updating the UniFi Cloud Key firmware will also
update the UniFi Controller software. We recommend
that you back up your UniFi Controller configuration
before updating the UniFi Cloud Key firmware.
To upgrade the firmware of the UniFi Cloud Key:
1. Ensure that your host system is on the same Layer-2
network as the UniFi Cloud Key.
2. The UniFi Cloud Key is set to DHCP by default, so it will try
to automatically obtain an IP address. Assign a specific IP
address to the UniFi Cloud Key, or check the DHCP server
for its IP address.
Note:
Cloud Key is 192.168.1.30.
The default fallback IP address of the UniFi