Appendix; Other Applicable Documents; Approvals And Certifications - ABB EAN823 Operating Instruction

11 Appendix

11.1 Other applicable documents

• Data Sheet LME620-AI / AN (10/68-2.73)
• Data Sheet PME120-AI / AN (10/68-1.51)
• Data Sheet RSD10 ... 20 (10/68-2.75)
• Data Sheet RSD50 (10/68-2.77)
• Data Sheet RSD100 (10/68-2.79)
• Data Sheet RHD250 (10/68-1.53)
• Data Sheet RHD500-800 (10/68-1.55)
• Data Sheet RHD1250-2500 (10/68-1.57)
• Data Sheet RHD4000 (10/68-1.59)
• Data Sheet RHD8000 (10/68-1.61)
• Data Sheet RHD16000 (10/68-1.63)
• Data Sheet EAN823 (10/68-8.26)
• Data Sheet EBN853 (10/68-8.27)
• Data Sheet EBN861 (10/68-8.22)
• Data Sheet Software for Contrac Actuators for Operation, Parmeterization and Service
(10/68-510)
• Operating Instructions for Electrical Part-Turn Actuators PME120 / RHD250 ... 4000
(OI/PME/RHD250_4000)
• Operating Instructions for Electrical Part-Turn Actuators RHD8000 ... 16000
(OI/RHD8000_16000)
• Operating Instructions for Electrical Linear Actuators LME620 / RSD10 ... 100
(OI/LME/RSD10_100)
• Operating Instructions Software for Contrac Acatuators ECOM688 for Contrac Power
Electronic Units (42/68-504)
• Operating Instructions Software for Contrac Acatuators ECOM700 for Contrac Power
Electronic Units (OI/ECOM700)
• Configuration and Parameterization Instructions (45/68-10)

11.2 Approvals and certifications

CE mark
Important (Notice)
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.com/instrumentation
OI/PME/LME/EAN823/EBN853/EBN861-EN
The version of the meter in your possession meets the requirements of the
following European directives:
- EMC directive 2004/108/EC
- Low voltage directive 2006/95/EC
Appendix
41