Failed Automatic Sim Detection - HP iPAQ hw6500 series User Manual

Editing Network Properties
Tapping on the Edit Network Properties bar on the GPRS
Settings screen gives you access to the following areas:

Failed Automatic SIM Detection

If the SIM card is not detected by the application:
Check to see if the SIM card is present in the HP iPAQ. If it is
not present, insert the SIM card and relaunch the application.
If the SIM card is not recognized by the application, create a
new connection.
Ensure that the contacts on your SIM card and your SIM slot
are not covered with a residue or dust that would inhibit
connection.
5–34
Revised: 12/16/04
Internet Connection Information—Walks you through
the different settings for GPRS (General Packet Radio
Service) and CSD (Circuit Switched Data) connections.
Text Message (SMS)—Allows you to modify the Text
Message service center number.
MMS Multimedia Messages—Allows you to modify the
MMS (Multimedia Message Service) Center address.
WAP Information
Using the Phone Features
User's Guide