Charging With The Hp Ipaq Cradle And Ac Adapter - HP iPAQ hw6500 series User Manual

Charging with the HP iPAQ Cradle and
AC Adapter
Use the HP iPAQ Cradle to charge the HP iPAQ.
Note:
charging it.
To charge the HP iPAQ using the cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
cradle 2.
2. Slide the bottom of your HP iPAQ into the cradle 3 and push
firmly to seat it.
CAUTION: To avoid damaging your HP iPAQ or the cradle, check to
Ä
be sure the HP iPAQ and cradle connectors are properly aligned
before pushing the HP iPAQ into the cradle.
Note:
the battery is recharging and turns solid amber (nonblinking)
when the battery is fully charged.
13–8
It is not necessary to synchronize your HP iPAQ before
The amber charge light on the Power button blinks while
Managing the Battery
User's Guide