Setting Up Your Hp Ipaq; Step 1: Remove The Battery Cover And Insert The Sim Card - HP iPAQ 510 Product Manual

4

Setting Up Your HP iPAQ

Step 1: Remove the battery cover and insert the SIM card

1. Press the release button on the battery cover and slide the cover down and away from the HP iPAQ.
2. Remove the battery.
NOTE:
is provided by a mobile phone service provider.
3. Place the SIM card in the provided slot.
NOTE:
position.
4. Slide the SIM card into the slot.
6 Chapter 4 Setting Up Your HP iPAQ
If the battery is already installed, remove it before inserting the SIM card. The SIM card
Make sure that the metal contacts are facing down and the notched corner is in the correct