Mitsubishi Electric CP-D70DW Operation Manual page 7

SAFETY PRECAUTIONS
• Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.
• Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to
extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.
• Depending on the intermal temperature, the printer may stop printing temporarily during printing. (The POWER indicator
blinks green.) Please wait for the printer to resume printing.
Do not touch the print paper.
• Each time printing is completed, remove the prints. If the prints are not removed, a paper jam may occur.
NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN
OCCURRENCE OF A MALFUNCTION.
Cautions to prevent the printer from falling
CAUTION
Falling this printer due to shock or other reasons may
cause injury.
For your safety, make sure to secure the printer by
the following procedure when you decide the location
of installation of the printer.
1. Secure the securing band (supplied) to the printer
with the screw (supplied).
2. Secure the other side of the securing band to
the installation location with the flat-head screw
(supplied).
OTHER CAUTIONS
Screw (supplied)
Securing band
(supplied)
Flat-head screw (supplied)
4