Cleaning - Mitsubishi Electric CP-D70DW Operation Manual

CLEANING

Cleaning as indicated below will help maintain stable printer operation and extend the printer's life.
Make sure to turn off the power before cleaning.
Clean the filter part with a vacuum as shown right.
THERMAL HEAD CLEANING
Press the OPEN button to open the printing unit.
Take the ink cassette out of the printer.
Preparations
Alcohol (isopropyl alcohol)
Soft and claen cloth
Other : Cleaner pen (option)*, Cleaning ribbon (option)*
* Please ask the dealer about options.
When lines appear on the printed images, clean the thermal head.
Wipe the head cleaning part (as shown right) carefully with cloth dampened with a
small amount of alcohol.
• Do not damage the thermal head.
• When the poor print quality is not corrected even if the head has been cleaned,
replacement of the thermal head may be required. Contact your dealer.
• Thermal head is hot right after printing. Wait until the head cools before cleaning
the thermal head.
• The thermal head may be damaged if you touch it while static electricity builds
up on your body.
FILTER CLEANING
NOTE
CAUTION
NOTE
Filter (inside)
Cleaner pen
Cleaning part of thermal head
Inside
Outside
152 mm
lines
Printing
surface
about 12 mm
about 12 mm
20