Romoving The Mini Pcie Adapter From The Main Board - Huawei MU709 Series Hardware Manual

HUAWEI MU709 Series HSPA+ Mini PCIe Module
Hardware Guide





6.5.2 Romoving the Mini PCIe Adapter from the Main Board

Step 1 Disconnect the antenna cables from the Mini PCIe Adapter. You can lift the
connectors using a small screwdriver.
Step 2 Remove the two screws with the screwdriver.
Insert the antenna connectors vertically into the antenna interfaces of the Mini PCIe
Adapter.
Do not press or squeeze the antenna cable or damage the connectors. Otherwise, the
wireless performance of the Mini PCIe Adapter may be reduced or the Mini PCIe Adapter
cannot work normally.
Ensure that the antenna cables are routed through the channel in the frame of the PC and
do not lay the cables across the raised edges of the frame.
The module could not be installed or removed when the host is powered on. Otherwise, it
may result in permanent damage to the module.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 04 (2015-06-25)
Mechanical Specifications
51