Table of Contents
Advertisement
A
Figure 12. Installing the interface card
1.
Place the printer unit on one side, as shown in Figure 12.
2.
Align the bottom of the interface card (
press to secure the latch.
3.
Connect the printer with your system unit or network (using the RS-232, RS-485, USB, or
Ethernet connector).
Note: You can plug all cables into the interface card before installation; however, do not
plug in the power until after installation.
4.
If you have a power cord, connect it to the printer.
Installing the fillers
The fillers are an important part of your integrated system. They securely position your printer
into position with the system unit and other peripherals.
Refer to the installation documentation for your system unit for complete instructions.
30
4610 Hardware Guide for Models 2CR and 2NR
B
) to the slot (
) on the base of the printer and
A
B
Hide quick links:
Advertisement
Table of Contents
