Humidifier Disassembly; Figure 5-10 Humidifier Parts - GE Giraffe Service Manual

Chapter 5: Repair Procedures

5.5.7.2 Humidifier Disassembly

Refer to "Figure 5-4 Chassis Bottom Cover" and "Figure 5-10 Humidifier Parts".
M3 x 12 Phillips head screw
(Attaches ground wire with two
star washers)
M3 x 10 socket
head cap screw
Star washer
Spacer
M3 x 10 Phillips head
coated screw
Add water thermostat
Safety thermostat
Split ring washer
6-32 Hex nut
Ramp block
Silicone tube
Steam outlet
Reservoir seal
1. Remove the humidifier reservoir.
2. Remove the 6 screws that secure the wire raceway cover and remove the cover.
3. Remove the chassis cover. (Refer to section 5.5.1.)
4. Disconnect the 3 electrical connectors.
82
Top bracket
Top gasket
Heater cartridge
M3 x 10 Phillips head coated screw
Heater mount
Heater cartridge sheath
Bottom bracket
Protective insert
Insulating cylinder

Figure 5-10 Humidifier Parts

6600-0356-000 103
M3 x 16 Phillips head screw
Reservoir switch
Reservoir switch button
Split ring washer
Bottom gasket
© 2001 by Datex-Ohmeda, Inc.. All rights reserved.