Operation And Alignment; Location Of The Operation And Alignment Controls; Figure 3: Location Of The Operation And Alignment Elements - Siemens SCD 1597 Operating Instructions Manual

3. Operation and Alignment

This chapter contains a description of all the operating and alignment functions.

3.1. Location of the Operation and Alignment Controls

All controls are accessible from the front and rear of the unit. They are located on the rear of
the unit is shown in Figure 1 on page 31 and are used for the OSD-menu.
S1
S2
S3
S4
Compartment for
power supply unit

Figure 3: Location of the operation and alignment elements

front
+
-
↓
LCD-Monitor SCD 1597-R/RT/R8S
VGA-interface
S1
S2
S3
S4
Page 13 / 22
Touchscreen (option)
Operating Instructions
power supply
rear
UP
DWN
MEN
SUB
DOC-Nr.: B3 0038 D4.DOC