Figure 2-123 Connecting A Pc For Smdr; Wireless Headset Adapter (Wha) - NEC SL2100 Hardware Manual

SL2100
1. Connect the straight type Ethernet cable (CAT5) between the system and In-house LAN.
The SMDR feature is assigned using system programming.

5.9 Wireless Headset Adapter (WHA)

5.9.1 Operation
Refer to the Plantronics User Guide for additional details.
5.9.2 General Notes
• The WHA is compatible with all 2W Digital Multiline Terminal: - 12/24TXH-B1 Digital Telephones
(BE116515/BE116516)
• A "HEADSET" key does not need to be programmed on the SL2100 Telephone.
• Installation of the WHA must be done by your NEC dealer.
5.9.2.1 Installing the Wireless Headset Adapter
Installation notes:
Refer to the Plantronics User Guide for additional details.
• Installation of the WHA must be done by your NEC dealer.
• Disconnect the telephone line cord from its wall jack.
• Plug the cord from the cordless headset base unit into the IP7WW-12/24TXH-B1 TEL headset
socket.
• Plug the AC Adapter cord into the cordless headset base unit.
• Refer to the cordless headset user guide and adjust the audio controls on the cordless headset
base unit to match the IP7WW-12/24TXH-B1 Telephone.
2-90
CPU board
ST 100 1G ACT
ETHERNET VOIPDB RUN ALM
EXP1 EXP2
Hub

Figure 2-123 Connecting a PC for SMDR

LOAD
ISSUE 1.0
PC
Installation