INVISIBLE FENCE Indoor Shields Plus Owner's Manual
Hide thumbs
Also See for Indoor Shields Plus:
- Owner's manual (10 pages) ,
- Owner's manual (15 pages) ,
- Manual (12 pages)
Related Manuals for INVISIBLE FENCE Indoor Shields Plus
Summary of Contents for INVISIBLE FENCE Indoor Shields Plus
- Page 1 Indoor Shields Plus ® Owner’s Manual Please read this entire guide before operating. www.InvisibleFence.com...
-
Page 2: Important Precautions
Accordingly, if a customer has reason to believe that their pet may pose a danger to others, or harm itself, the customer should not rely solely upon the Invisible Fence® Brand system to keep the pet from crossing the boundary. - Page 3 • Read and follow the important tips on how to avoid pressure necrosis in your Invisible Fence® Brand Computer Collar® unit manual. • Train your pet according to the instructions in the Invisible Fence® Brand training protocols. Complete all steps before allowing your pet to run free. Do not become overly confident if your pet has become conditioned to the Invisible Fence®...
-
Page 4: Table Of Contents
Table of Contents Important Precautions ..........................2-3 Components ................................5 How the System Works ............................ 5 Operating Guide ............................6-10 Charging ..............................6 Turning On and Off ..........................6 Adjust Signal Field Range ........................7 Verify Signal Field Range ........................7 Changing the Channel Setting on the Indoor Shields® Plus Transmitter ......7 Wired Operation ............................ -
Page 5: Components
Components AC Adapter Indoor Shields® Plus Transmitter Owner’s Manual HOW THE SYSTEM WORKS Indoor Shields® Plus Transmitter The transmitter is the heart of the system. It produces a signal that communicates with your pet’s Computer Collar® unit to keep your pet away from unwanted areas. The signal can be delivered from the transmitter either through a wireless sphere or through up to 150 feet of wire. -
Page 6: Operating Guide
Operating Guide Important: To ensure your pet does not receive an unintended correction, make sure your pet is not wearing the Computer Collar® unit when turning ON or adjusting the Indoor Shields® Plus transmitter. 1. Charge the Indoor Shields® Plus Transmitter • Lift the rubber cover protecting the charging jack located on the Indoor Shields®... -
Page 7: Adjust Signal Field Range
WIRELESS OPTION 1. Adjust Signal Field Range • Determine the desired location and the signal field range required • Wireless: 1.5 ft. minimum radius up to 6 ft. maximum radius • With the unit ON, press the RANGE UP (+) or the RANGE DOWN (-) buttons to increase or decrease the signal field range. -
Page 8: Wired Operation
You can create a signal field using up to 150 feet of boundary wire (14 - 20 gauge). The recommended wire can be purchased from your local Invisible Fence® Brand dealer. Visit www. invisiblefence.com to find an authorized dealer in your area. -
Page 9: Test The Signal Field
3. Test the Signal Field • Start with the range set to minimum of 2 segments and adjust the range up to 6 segments to get your desired coverage. There is a 1 ft. minimum radius and up to a 5 ft. maximum radius. • Holding the Computer Collar®... -
Page 10: Multi-Area Avoidance
Multi-Area Avoidance Your Indoor Shields® Plus Transmitter and the Computer Collar® unit are preset to operate on Channel A (CH.A). For homes with two or more pets, this setting is usually sufficient as long as all pets are required to avoid the same protected areas like keeping all pets away from the trash, off the counter tops, off the sofa, etc. -
Page 11: Troubleshooting
• Ensure the Computer Collar® unit is set to same Indoor Shields® fails to sound Plus transmitter CHANNEL setting. See Multi-Area Shielding warning beep Section on page 10. Need additional help? Contact your local Invisible Fence® Brand dealer. Call 1-800-578-3647 or visit www.InvisibleFence.com to find your local dealer. www.InvisibleFence.com... -
Page 12: Battery Disposal
If you no longer require this equipment, do not place it in the normal municipal waste system. Please return it to where it was purchased in order that it can be placed in our recycling system. If this is not possible, please contact your Invisible Fence® Brand dealer. www.InvisibleFence.com... -
Page 13: Compliance
Compliance US and Canada FCC ID: KE3-3002769 This device complies with Industry Canada rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 14: Notes
Dealer Name_________________________________ Dealer Phone_________________________________ System Frequency____________________________ Notes: ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ 800-578-3647 (USA) (865) 777-5404 (International) 400-1791 ©2013 Radio System Corporation All rights reserved. Protected by Patents: U.S.: 7,046,152; 7,068,174; 7,204,204; 8,430,064 www.InvisibleFence.com...
Need help?
Do you have a question about the Indoor Shields Plus and is the answer not in the manual?
Questions and answers