Connect To The Controller - Allen-Bradley CompactLogix 5480 User Manual

Connect to the Controller

Topic
Out-of-box State
Configure EtherNet/IP and USB Drivers on Your Workstation
Connection Options
Set the Controller IP Address
Update Controller Firmware
This chapter describes how to connect to the CompactLogix™ 5480 controller
before you use it.
IMPORTANT The content in this chapter describes how to connect to the controller to use
the Logix control engine. For example, how to set the IP address on Ethernet
ports A1, A2, or B1.
For more information on how to use the COS, including how to connect to it,
see Chapter 10,
Rockwell Automation Publication 5069-UM002A-EN-P - January 2019
Page
42
43
51
53
69
Commercial Operating System on page
2
Chapter
211.
41