Sony Betacam SX DNW-A65 Operation Manual page 77

Analog Betacam playback (DNW-A65P)
Video
Bandwidth Y
R–Y/ B–Y
S/N ratio Y
R–Y/ B–Y
K factor (2T pulse)
LF non-linearity Y
R–Y/ B–Y
Y/C delay
Audio (LNG)
Frequency response (at 20 dB below
peak level a) )
S/N ratio (at 3% distortion level) (CCIR
468-3 weighted)
Distortion (THD at 1kHz reference
level b) )
Wow and flutter (DIN45507 weighted)
a) Peak level: +8 dB above reference level
b) Reference level: +4 dBm
Processor adjustment range
Video level ±3 dB/ –∞ to +3 dB selectable
Chroma level ±3 dB/ –∞ to +3 dB selectable
Setup level (DNW-A65)
±30 IRE
Black level (DNW-A65P)
±210 mV
Y/C delay ±100 ns (in analog Betacam
playback)
Chroma phase ±30°
System phase Sync: ±15 µs
SC: ±200 ns
Metal tape
25 Hz to 5.5 MHz +0.5 dB/–4.0 dB
25 Hz to 2.0 MHz +0.5 dB/–3.0dB
48 dB or more
48 dB or more
2% or less
3% or less
4% or less
20 ns or less
Metal tape
50 Hz to 15 kHz +1.5 dB/–3.0 dB
68 dB or more
1% or less
0.1% rms or less
Input connectors
REF. VIDEO INPUT
Oxide tape
25 Hz to 4.0 MHz +0.5 dB/–6.0 dB
25 Hz to 1.5 MHz +0.5 dB/–3.0 dB
46 dB or more
45 dB or more
3% or less
Oxide tape
50 Hz to 15 kHz ±3.0dB
62 dB or more
2% or less
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75 Ω, sync negative
Appendix
A-3