Table of Contents
Advertisement
6-3 Extended Menu
Item number Item name
111
TSO/FEED PLAY
115
PHASE LOCK IN
VARIABLE X3
116
JOG DIAL RESPONSE
117
CONTROL PANEL
SELCTION
a)
Speed
TYPE 2
FWD
+3
(reverse)
+1
Rotation rate
RVS
FWD
-1
-3
RVS
6-10
Chapter 6 Menu System
Menu items in the 100s, relating to the control panels (Continued)
Settings
Select whether to enable tape speed override mode or feed play mode.
DIS : Disable both tape speed override mode and feed play mode.
TSO: Enable tape speed override mode.
FEED: Enable feed play mode.
Select whether or not to lock the capstan phase in X3 variable speed play mode.
OFF : Do not lock.
ON: Lock.
Select the tape speed characteristics for the jog dial rotation rate (VTR
commands).
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in the figure below
range –3 to +3. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the rotation rate)
TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in the
b)
figure below
TYPE4: Tape speed varies stepwise as shown in the figure below
range –2 to +2. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the rotation rate)
Select the control panel function when the CONTROL PANEL switch on the
subsidiary control panel is set to EXT.
SW : Only the control panel connected to the external control connector on the
connector panel functions.
PARA : Both the control panel connected to the external control connector and
the control panel of this unit function.
b)
Speed
TYPE 3
FWD
+3
RVS
-3
RVS
.
c)
Rotation rate
FWD
a)
over the
c)
over the
Speed
TYPE 4
FWD
+2
+1
Rotation rate
RVS
FWD
-1
-2
RVS
Advertisement
Table of Contents
