Sony Betacam SX DNW-A65 Operation Manual page 23

1 Analog audio output section
AUDIO OUTPUT CH1 to CH4 connectors
AUDIO OUTPUT
CH1 CH2
AUDIO OUTPUT CH1 to CH4 connectors (XLR 3-
pin, male)
These output analog audio signals for channels 1 to 4.
CH3 CH4
2 Reference video input/analog video
output section
1 REF. VIDEO INPUT connectors and 75 Ω
termination switch
VIDEO INPUT
REF.VIDEO
75Ω
ON
OFF
2 COMPOSITE VIDEO OUTPUT
connectors
3 COMPONENT VIDEO OUTPUT
connectors
1 REF. (reference) VIDEO INPUT connectors
(BNC type) and 75 Ω termination switch
Input a reference video signal. Input a video signal
with chroma burst (VBS) or a monochrome video
signal (VS). When using the loop-through connection
set the switch to the OFF position, and otherwise to the
ON position.
2 COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These output analog composite video signals.
When the CHARACTER switch on the subsidiary
control panel is set to ON, connector 3 (SUPER)
outputs a signal with superimposed time code, menu
settings, alarm messages, and other text information.
3 COMPONENT VIDEO OUTPUT connectors
(BNC type)
These output analog component video signals (Y/R–Y/
B–Y).
Chapter 2 Location and Function of Parts
VIDEO OUTPUT
COMPOSITE COMPONENT
1
Y
2 R-Y
3
B-Y
(SUPER)
2-15