Overlapped Clerk Entry - Sharp UP-3300 Instruction Manual

Overlapped Clerk Entry

This function allows to switch from one clerk to another clerk and to interrupt the first clerk's entry. So the
second clerk can do his or her entry in this mode. Interrupt handling is possible only in the overlapped clerk
entry. For actual use of this function, contact your authorized SHARP dealer.
NOTE
• The overlapped clerk entry is not effective while the tendering sale is going on.
• If any clerk is still making an entry (or has not finalized the transaction yet), the POS terminal does not run
in any mode other than REG and MGR, and no X/Z reports can be printed. The message "CLERK
REMAINED" is displayed at this time.
Example
The entry by clerk1 is started.
Clerk change (1 to 2), interrupt initiated
The transaction by clerk2 is finished.
Clerk change (2 to 1), entry restarted, transaction finished
Key Operation
Clerk 1 is assigned.
(Clerk key 1 is
inserted.)
Clerk 2 is assigned.
(Clerk key 2 is
inserted.)
Clerk 1 is assigned.
(Clerk key 1 is
inserted.)
000001
000003
000003
3 X/QTY
000002
CASH/TL
000001
000003
CASH/TL
Display
93