Sharp UP-3300 Instruction Manual page 144

PLU (continued)
• TAXABLE 1 through 6 (Use the selective entry)
YES: Makes the PLU taxable.
NO: Makes the PLU non-taxable.
NOTE
• The tax system of your POS terminal has been factory-set to automatic VAT1 - 6. If you desire to select
any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the combination of the
automatic VAT1 - 3 and the automatic tax 4 - 6, contact your authorized SHARP dealer.
• When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected, one of the
taxable 1 - 3 can be selected in combination with taxable 4 - 6.
• A PLU not programmed for any of these tax status is registered depending on the tax status of the
department which the PLU belongs to.
• HOURLY Gr.#1 through #3 (Use the numeric entry)
PLU hourly group number to classify PLUs for PLU hourly group reports (1 through 9)
• GROUP (Use the numeric entry)
PLU group number (00 through 99)
• COMMIS. Gr. No. (Use the numeric entry)
You can assign a PLU to a commission group (1 through 3).
If the number "0" is entered, no commission group number will be assigned to a PLU.
• OUTPUT KP No.1 and No.2 (Use the numeric entry)
ID number of the network remote printer 1 or 2 (1 through 9)
If the number "0" is entered, no remote printer will operate.
• RECEIPT PRINT (Use the selective entry)
YES: Prints the PLU sales information on the receipt.
NO: Prints nothing on the receipt.
• PINT PRICE1 through 7 (Use the numeric entry)
Pint price of each price level (max. 6 digits)
• PINT BASE QTY (Use the numeric entry)
Base quantity for each PLU/subdepartment that should be applied only to half/double pint entries (max.
2 digits: 0.0 to 9.9)
141