What’s in the box Camera Overview Lens Battery(CR123) Microphone Pairing button Warranty Card / Quick Start Outdoor, Battery-Powered Guide Camera Motion Sensor LED Status Indicator Screws / Plastic anchors...
Page 3
Create account and register Camera Power On Station Hub Connect the power Open the Wisenet adapter to the SmartCam+ app and Station Hub and plug create an account. it into the nearest Follow the on-screen wall outlet. instructions to Wi-Fi PAIR NETWORK register.
Page 4
Pairing the Camera with ※ For every instance the camera is added, the pairing ※ You can add Battery-Powered Cameras. Register must be done by pressing the [PAIR] button on each additionally by repeating STEP 1 to pair with the side.
Mounting the Camera ※ Before installing the camera, determine the best location and angle for the camera, and then install it. Note: If you are Place the bracket Match the bracket Adjust the angle of mounting the cover against the cover to the holes on view.
Page 6
Caution Recommended micro SD card - It is recommended to use a MLC for higher data density and reliability of recording. We recommend that you use the provided batteries, or well-known brand batteries such as Panasonic, Energizer, or Duracell. Use of counterfeit or low-quality batteries increases the risk of camera malfunction and the possibility of fire.