Table of Contents
Advertisement
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
•
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347
FAX : +1-201-902-0429
SAMSUNG TECHWIN MOSCOW OFFICE
•
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
•
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
•
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. : Z6806-0646-01A
VAN 05. 11
About this manual
Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later reference.
HIGH RESOLUTION DAY&NIGHT
THREE-AXIS V/F LENS DOME CAMERA
INSTRUCTION MANUAL
SID-450
Advertisement
Table of Contents
Related Manuals for Samsung SID-450
Summary of Contents for Samsung SID-450
-
Page 1: Instruction Manual
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD. • • 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 SAMSUNG OPTO-ELECTRONICS AMERICA,INC. - Page 2 Thank you for purchasing a SAMSUNG DOME CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SID-450 SERIES • NTSC MODELS •...
-
Page 3: Table Of Contents
• LENS (Adjusting to the brightness level) • SHUTTER (condition and speed control) • WHITE BALANCE control • BACKLIGHT (Backlight Compensation) • AGC (Auto Gain Control) • SSNR (Samsung Super Noise reduction) • SENS-UP • SPECIAL • EXIT Troubleshooting Specification... -
Page 4: Features
SSNR (Samsung Super Noise Reduction) By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low Horizontal Resolution 530 TV Lines illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N) -
Page 5: Precautions
Precautions Installation of the camera should be performed Stop use immediately if smoke or by qualified service personnel only. unusual heat is detected in the camera. As installation of the camera requires experience and It may result in fire. skill, installation without the assistance of qualified service personnel may result in a risk of fire or electric shock. -
Page 6: Composition
Composition 1. SID-450 2. Instruction Manual 3. M4 Tapping Screws 4EA 4. M4 Machine Screws 4EA 5. Adapter plate COLOR DOME CAMERA User’s Manual Name and Function of Each Section Lens Rotation(3-axis) Lens Rotation(3-axis) Guide The lens can be adjusted ±175˚ horizontally and ±80˚ (tele) vertically. -
Page 7: Installation
Name and Function of Each Section Zoom Handle To adjust zoom magnification by turning. SETUP button Used for the menu display or function settings. Left button Right button Used when changing item values, by moving the cursor to the left or right on the menu screen Up button Down button... - Page 8 Installation 1. When installing on a adapter plate 1) Place the bracket provided on the An arrow for installing directions installation surface and fix it with the M4 adapter plate tapping screws (provided).(Select either 85X85 or 83.5X46) 2) When placing the camera body on the plate, insert the plate pin into the mounting hole on the body as shown in figure-1 and fix it by turning clockwise.
-
Page 9: Adjusting Lens Angle
Installation Adjusting lens angle. 1. Lens 3-axis adjustment (1) Adjusting the horizontal angle (PAN operation) 1) Turn the rotation lock to the unlocking direction(counter-clockwise) to free the rotation guide. 2) Turn the rotation guide to the desired direction. (The adjustable range is from -175°... - Page 10 Installation (3) Adjusting the H. position of the screen (Z-axis operation) 1) After setting the lens direction of the rotating lens, turn the rotation horizontally with the zoom and focus control groove facing downwards (towards the bottom surface). Notes • Be aware that turning only the lens rotator for horizontal angle adjustment may cause an equipment failure.
-
Page 11: Adjusting Varifocal Lens Zoom And Focus
Installation Adjusting varifocal lens zoom and focus 1) Unlock the zoom (or the focus) handle to release it 2) Adjust the zoom (or the focus) handle by moving it to WIDE (NEAR) or TELE (FAR) position. 3) After adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted position does not change. -
Page 12: Connecting To Power
Menu LENS (Adjusting to a lens) SHUTTER (Conditon and speed control) · FLK WHITE BALANCE control BACKLIGHT (Backlight compensation) AGC (Auto Gain Control) SSNR #18(0.83mm (Samsung super noise reduction) 0.030 0.018 0.011 0.006 SENS-UP (Low illuminance) SPECIAL EXIT Camera Operation SETUP menu ·... -
Page 13: Settings
Camera Operation Settings Settings can be made using the 5 buttons located on the back of the camera. SETUP button DOWN button LEFT button RIGHT button UP button 1. Please press the SETUP button • Settings can now be made. The SETUP menu is displayed on the monitor. 2. -
Page 14: Shutter (Condition And Speed Control)
Camera Operation 2. Using the SETUP button, you can control the brightness of the screen. Notes • The brightness of the screen can be adjusted within the range of 1~70. The optimum level of brightness for the user can be achieved by adjustment. 3. -
Page 15: Backlight (Backlight Compensation)
Camera Operation BACKLIGHT (Backlight Compensation) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. -
Page 16: Ssnr (Samsung Super Noise Reduction)
Camera Operation SSNR (Samsung Super Noise reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons. -
Page 17: Special
Camera Operation SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. CAMERA ID: If the ID is input, the camera ID appears on the monitor. 1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN button. - Page 18 Camera Operation 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. Camera ID A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z...
-
Page 19: Exit
Camera Operation MOTION DETECTION: This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. -
Page 20: Troubleshooting
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Solution • Please check the power connection. Nothing appears on • Please check the video signal line connection. the screen. -
Page 21: Specification
Specifications ITEM SID-450N POWER DC 12V ± 10%, Max 2.5 W Total Pixels 811(H) x 508(V) Effective Pixels 768(H) x 494(V) Sensor 1/3 inch Super HAD CCD Scanning System 2:1 Interlace Synchronization Internal Frequency Horizontal: 15.734KHz Vertical: 59.94 Hz Horizontal: 15.625 KHz Vertical: 50Hz LENS TYPE 3X Vari-focal Lens (F1.2 f3~9mm) Max. -
Page 22: Declaration Of Conformity
DECLARATION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera...