Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung BW-2302 SERIES
Summary of Contents for Samsung BW-2302 SERIES
- Page 1 B £ƒ W CCD CAMERA INSTRUCTION MANUAL BW-2302 SERIES SAMSUNG CCD CAMERA...
- Page 2 Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description. § BW-2302 Series • EIA models •...
- Page 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
- Page 4 WARNING- TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE. INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 5: Table Of Contents
PRECAUTIONS ................ 6 GETTING TO KNOW YOUR CAMERA........7 Front ..................7 Back ..................8 Accessories ................9 Bottom ..................10 CONTROLS AND ADJUSTMENTS........... 11 CONNECTION ................14 Installing Auto IRIS Lens ............14 Installing C-Mount Lens ............16 Installing CS-Mount Lens ............17 Connecting To Monitor ............ -
Page 6: Front
• Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -10 ¡ to 50 ¡ . Especially be careful for ventilation under high temperature. • Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly. -
Page 7: Back
C-Mount Lens Adapter ‹˘ ‹˘ Tripod Mounting Hole. ‹¯ ‹¯ Back Focus Lock Screw ‹´ Glass Protecting Cap ‹˜ ‹˜ CS-Mount Lens Adapter £ƒ W CCD CAMERA... - Page 8 Getting to Know Your ‹˛ ‹˛ IRIS Mode SelectionSwitch. ‹ ˙ ‹ ˙ Video Out Jack ‹¨ ‹¨ Auto Iris Lens Connector ‹ ‹ SYNC Mode selection switch Notes:There is no Sync selection switchon the rear of DC power type. DC power High Voltage type...
-
Page 9: Accessories
Getting to Know Your Accessories DC £ƒ High Voltage type Notes: There is no DC iris selection switch on the rear of IRIS lens plug High Voltage type. ‹˝ ‹˝ BLC Function ON/OFF Switch ‹ ‹ LEVEL Adjustment V.R L-Wrench ‹¸... - Page 10 Getting to Know Your Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) £ƒ W CCD CAMERA...
-
Page 11: Bottom
Glass Protecting Cap Be sure to cap the lens mount when the lens is not mounted. Pull out the cap to remove. ‹ˆ C-Mount Lens Adapter Used to mount a C-mount lens. Remove it to mount a CS-mount lens. Turn counterclockwise to remove. -
Page 12: Controls And Adjustments
Controls and Adjustments ‹ SYNC Mode Selection Switch Used to choose INT or LL mode. ¡ SYNC (Synchronization) Mode INT(Intrenal) mode : The camera may be operated independently with its internal crystal control. LL(Linelock) mode : It synchronizes the video signal between cameras using the frequency of the AC power supply without external synchronous generator. - Page 13 Controls and Adjustments Monitor picture Adjustment direction To make it brighter Turn clockwise To make it darker Turn counterclockwise Notes : This function is activated when being in the ESC mode. ‹ ˝ BLC(Backlight Compensation) Function ON/OFF Switch This switch improves an image that is darkened because of backlighting. When the lighting source is in the rear of object, the object might be seen some darkness.
- Page 14 Lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts auto iris lens, both C- and CS-mount lens. Notes: ƒ U If the lens is stained with fingerprint or something, the image quality might be poor.
- Page 15 C O N N E C T I O N 3. Remove the cover from the connector pin supplied, and solder the lens cable to the connector pin as shown below. • Video type : No. 1 Pin --- Red (Power source, DC 9V, 40mA MAX) No.
- Page 16 C O N N E C T I O N 5. Connect the lens plug to the auto iris connector on the rear of the camera. 6. Set the IRIS Mode selection switch to Video or DC according to the type of the lens. AC power type High Voltage £ƒ...
- Page 17 C O N N E C T I O N 1. Remove the protecting cap and C-mount adapter. C-Mount Lens Adapter. Glass Protecting Cap. 2. Attach the lens into the camera by turning clockwise. Notes: • Use the lens under the specification aside. •...
- Page 18 C O N N E C T I O N Connect the VIDEO out jack to the monitor video in jack. Monitor CCD Camera • As a connecting method varies according to instruments, refer to the manual supplied with the instrument. •...
- Page 19 C O N N E C T I O N Each model has the different power source and the operation characteristics. Make sure the power is supplied to the appropriate power terminals on the camera. Connect the power as referred on the following figures.
-
Page 20: Connection
If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Solution Nothing appears • Check that the power cord and line connection on the screen. between the camera and monitor are made properly. - Page 21 ITEM BW-2302EA BW-2302ED BW-2302EH POWER SOURCE AC24V,50/60Hz DC12V AC100-240V,50/60Hz POWER CONSUMPTION INT/Linelock INT/Linelock seclectable seclectable SYNC. SYSTEM INT Only (Phase:30~300¡˘ (Phase:30~300¡˘ Power frequency: Power frequency: 60Hz only) 60Hz only) PICK-UP DEVICE 512(H)¡¿492(V) 1/3”CCD 2:1 Interlace(EIA Standard) SCANNING SYSTEM 525Lines/60Fields/30Frames MINIMUM ILLUMINATION 0.1Lux at F1.2 RESOLUTION ¡ˆ...
- Page 22 ITEM BW-2302CA BW-2302CD BW-2302CH POWER SOURCE DC12V AC24V¡› ,50Hz AC230V¡› ,50Hz POWER CONSUMPTION 3.5W INT/Linelock INT/Linelock seclectable seclectable SYNC. SYSTEM INT Only (Phase:30~300¡˘ (Phase:30~300¡˘ Power frequency: Power frequency: 50Hz only) 50Hz only) PICK-UP DEVICE 512(H)¡¿582(V) 1/3”CCD 2:1 Interlace(CCIR Standard) SCANNING SYSTEM 625lines/50Fields/25Frames MINIMUM ILLUMINATION 0.1Lux at F1.2...
-
Page 23: Declaration Of Conformity
EN 60065 EN 55 013 EN 50 082-1 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG AEROSPACE INDUSTRIES, LTD. Legal Representative in Europe Signature Signature Full Name YOUNG TAEK SON Full Name... - Page 24 SALES NETWORK ¡⁄ SAMSUNG OPTO-ELECTRONICS AMERICA, INC. SAMSUNG TECHWIN CO., LTD Closed Circuit Division Optics & Digital Imaging Division 40 Seaview Drive, Secaucus N.J 145 -3, Sangdaewon 1-Dong, Jungwon-Gu, 07094, U.S.A. Sungnam, Kyungki-Do, Korea 462-121 TEL : (201) 902-0347 TEL :82 -31-740 - 8137~41...