Advertisement
Parts List
Before discarding any packing materials, check the adjustable bed carton and verify all items in the parts list are
included.
Remote control (1)
AAA batteries (3)
Mattress retainer bar (1)
Center connection
Screw & nut
(2)*
Wrench
(1)*
bracket
(2)*
Bed leg strap (1)
**
Adjustable bed legs
***
*
Only available with Queen, King, and Cal King models.
**
Only available with Twin XL and Split Cal King models.
***
Twin, Twin XL, Full, Full XL, and Split Cal King models have four (4) bed legs. Queen, King, and Cal King have six (6) bed legs.
5
Hide quick links:
Advertisement
Need help?
Do you have a question about the 900 POWER BASE and is the answer not in the manual?
Questions and answers
The remote doesn’t operate one side of adjustable. How do I check to make sure remote is paired properly. Pairing the trmote to my side of bed remote
The context does not provide specific instructions on checking if the remote is paired properly to your side of the bed. However, it mentions ensuring that the remote control is paired with the adjustable bed if it fails to respond.
This answer is automatically generated
@Mr. Anderson
@Mr. Anderson So how do I reconnect the remote to Bed frame
Can not get remote to work.
To fix the remote for the MATTRESS FIRM 900 POWER BASE if it is not working, try the following steps:
1. Pair the Remote – Ensure the remote control is paired with the adjustable bed.
2. Check Power – Make sure the adjustable bed is plugged into a working and grounded electrical outlet.
3. Disconnect App Connection – The remote will not work while the bed is connected to the Mattress Firm 900 mobile app. Disconnect from the app if necessary.
4. Reset the Bed – Press and hold the FLAT button on the remote for over 1.5 seconds after plugging in the power cord to reset the bed.
5. Replace Batteries – If the remote has batteries, replace them with new ones.
If the issue persists, refer to the troubleshooting section in the manual for further guidance.
This answer is automatically generated
Foot of bed stuck
The manual does not provide specific troubleshooting steps for a stuck foot mechanism. However, you can try the following general steps:
1. Check for Excess Weight – Ensure that the bed is not overloaded beyond the recommended weight limit (850 lbs. distributed evenly).
2. Reset the Control Unit – If the bed has automatically stopped due to excess weight, remove the weight and wait 30 seconds for it to resume function.
3. Inspect for Damage – If the bed has been dropped or damaged, the foot mechanism may not function properly.
4. Check Electrical Connections – Ensure the foot lift cord is properly plugged into the control box.
5. Unplug and Restart – Disconnect the bed from power, wait a few minutes, and plug it back in.
6. Contact Support – If the issue persists, consult the manual for troubleshooting or contact the manufacturer for further assistance.
If the foot mechanism is physically stuck, avoid forcing it and seek professional help.
This answer is automatically generated
How I disassemble the Mattress Firm 900 adjustable bed?
Our dog chewed through the wires so our bed no longer works. How can we order new wires and parts to make it work again?