Removal - NEC Express5800/T120h User Manual

Chapter 2 Preparations

Removal

To remove the HDD cage, follow the steps below.
If multiple HDD cages are installed, remove HDD cage in the lower Box first.
(1) 2.5-inch HDD cage
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Remove the hard disk drive installed in the 2.5-inch HDD cage.
3. Remove SAS/SATA cable and power cable.
4. Unfasten four screws that are securing the 2.5-inch HDD cage.
5. Pull the 2.5-inch HDD cage out of the unit.
6. If the unit is operated with the 2.5-inch HDD cage removed, attach the blank cover with screws.
7. See Chapter 2 (1.24 Installing Side Cover) to attach the side cover of the server.
(2) 3.5-inch HDD cage
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Remove the hard disk drive installed in the 3.5-inch HDD cage.
3. Remove SAS/SATA cable and power cable.
4. Unfasten four screws that are securing the 3.5-inch HDD cage.
5. Pull the 3.5-inch HDD cage out of the unit.
6. If the unit is operated with the 3.5-inch HDD cage removed, attach the blank cover with screws.
7. See Chapter 2 (1.24 Installing Side Cover) to attach the side cover of the server.
When installing another HDD cage, two guides must be removed.
Important For maintaining the cooling effect, the blank cover should be attached.
Important For maintaining the cooling effect, the blank cover should be attached.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
97