NEC Express5800/T120h User Manual page 93

Chapter 2 Preparations
(b) Mounting on Box2
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Remove the blank cover referring to "(1) 2.5-inch HDD cage" - "(b) Installing in the Box 2".
3. Mount the 3.5-inch HDD cage on the device and fix the four positions of cage with the screws attached to
the cage.
4. With the power cable attached to the 3.5-inch HDD cage, connect the 3.5-inch HDD cage's power
connector and the mother board's power connector for Box2 drive.
5. Connect the optional built-in SAS/SATA cable and the power cable.
For connecting SAS/SATA cable, see (d) Cable Route in this manual.
Power
connector
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
Power
connector for
Box2 drive
93