Removal - NEC Express5800/T120h User Manual
Hide thumbs
Also See for Express5800/T120h:
- Installation manual (103 pages) ,
- Manual (54 pages) ,
- Installation manual (101 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
5.
Attach additional batteries to the main unit.
(a)
Insert the tab on the RAID battery holder for RAID controller into their respective grooves on the main
unit to attach.
(b)
Connect the cable to the battery connector for RAID controller on the motherboard.
6.
See Chapter 2 (1.24 Installing Side Cover) to attach the side cover of the server.
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
136
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
