Huawei SUN2000 User Manual page 124

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Parameter
Encrypted with
DHCP
IP address
Subnet mask
Gateway
Primary DNS server
Secondary DNS server
RS485 Setting
To set RS485 communications parameters, choose Comm config > RS485 setting from the
Operation console screen.
Issue 01 (2018-05-21)
Description
Specifies the encryption
level for the SUN2000 to
connect to the router over
WiFi. It should be the same
as the encryption level of
the router.
This parameter is associated
with the network name.

If the IP address
automatically assigned
by the home router is
used, enable this
parameter. Then the
following parameters
will be automatically
assigned.
 If the IP address
automatically assigned
by the home router is not
used, disable this
parameter. Then the
following parameters
need to be manually
assigned.
Specifies the IP address of
the router to which the
inverter WiFi network
connects. Recommended:
Set the IP address in the
same network segment as
the home router IP address.
Specifies the router subnet
mask.
Specifies the router gateway
address.
Specifies the address of the
primary domain name
service (DNS) server.
Specifies the address of the
secondary DNS server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range
 Not encrypted

WEP_OPEN

WEP_SHARED
 WPA
 WPA2
 Disable

Enable
[1.0.0.0, 223.255.255.255]
N/A
N/A
N/A
N/A
117