Huawei SUN2000 User Manual page 148

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Figure 8-11 Placing the new power compartment
Step 10 After cables are routed, install the upper mounting kit of the new power compartment onto the
mounting bracket. Reinstall the four M6 screws to secure the power and maintenance
compartments.
Figure 8-12 Securing the power and maintenance compartments
Step 11 Reinstall the ground, fuse, AC and DC cables in sequence.
Step 12 Reinstall the USB cable (optional, only for the 4G model), or reinstall the WLAN cable
(optional, only for the WLAN model).
Step 13 Reinstall the 10-pin signal terminal and 2-pin enable terminal.
Step 14 Reinstall the maintenance compartment cover.
Issue 01 (2018-05-21) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
141