Scope And Multimeter Setup - Snap-On VERDICT D7 User Manual

Scope Multimeter Operations
Graphing Multimeter Options
The following options are available for testing:
Single Graphing Meter
•
Volts DC
•
Volts AC RMS
•
• Frequency
• Pulse Width
• Duty Cycle
Ohms
•
Low Amps (20)
•
Low Amps (40)
•
100 PSI Vacuum
•
• 100 PSI Pressure
• 500 PSI Pressure
• 5000 PSI Pressure
Digital Multimeter Options
The following options are available for testing:
Volts DC
•
• Volts AC RMS
• Ohms
• Diode/Continuity
• Capacitance
Low Amps (20)
•
Low Amps (40)
•
Presets
Presets are the personal meter settings that you have saved.

9.2.2 Scope and Multimeter Setup

The following sections explain how to adjust the scope and multimeter for the specific type of
signal being sampled. Most of these setup operations are available from the toolbar.
Trace Controls
The Traces controls are used to adjust individual characteristics of how the signal is sampled and
displayed for each trace. The more commonly used trace settings can also be made from the
Trace Details area of the touch screen (see
shortcut to some of the operations described in the following sections.
"Trace Details‚" on page
99
Operations
95). Trace Details offers a