Items For Which User Settings Are Available - Pioneer DDJ-RB Service Manual

Dj controller
Table of Contents

Advertisement

5

8.3 ITEMS FOR WHICH USER SETTINGS ARE AVAILABLE

This unit is provided with user settable items, as shown below.
Although no serious operational problems occur even if data for such user settable items are cleared during repair, it is
recommended that you take note of those settings before starting repair.
Use the Check Sheet, to which you can transcribe the settings.
If the corresponding part or board Assy is replaced for repair, change the user resettable settings to those noted on the Check
Sheet before starting repair. If resetting is not possible, when returning the repaired product, be sure to tell the customer that
the Utility settings have been cleared and will have to be reset, as required.
Item for Which User's
Setting is Available
MIDI MODE setting
MASTER output monaural/
stereo switching
MASTER output peak limiter
MIC output peak limiter
DEMO MODE setting
Each of the above items can be set in Utilities modes.
To enter Utilities mode,
while pressing both SHIFT and PLAY/PAUSE buttons on the left deck, connect the USB cable to the main unit
(main unit is turned on).
For changing the settings, refer to the operating instructions of the unit.
Sheet for confirmation of the user setting
MIDI MODE setting
AUTO
DEMO MODE seting
1 minute after
OFF
no operation
5
6
Setting Value (The factory default
settings are indicated in bold.) / Indication method
AUTO/Compulsion (GeneralDJApp)
[FX ON] button off/[FX ON] button lit
Monaural/Stereo
[HOT CUE] button off/[HOT CUE] button lit
Setting disabled/Setting enabled
[PAD FX1] button off/[PAD FX1] button lit
Setting disabled/Setting enabled
[SLICER] button off/[SLICER] button lit
OFF/1 minute after no operation/5 minute after no operation/
/10 minute after no operation
Performance pad on the left deck:
1st pad lit/2nd pad lit/3rd pad lit/4th pad lit
MASTER output
monaural/stereo switching
Compulsion (GeneralDJApp)
monaural
5 minute after
10 minute after
no operation
no operation
6
7
MASTER output
peak limiter
stereo
disabled
DDJ-RB
7
8
Content to
Part Name
be Stored
IC408
Utility setting
(MAIN Assy)
MIC output peak limiter
enabled
disabled
enabled
8
A
B
C
D
E
F
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents