Figure 33 Dmz And Alg Window; Table 31 Dmz And Alg Parameters - Nokia 7368 ISAM CPE Product Manual

Configure a A-020W-A
Procedure 28
1
Figure 33
Table 31
2
3
4
80
Release 05.08.01 | June 2018 | Edition 01
DMZ and ALG configuration
Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window,
as shown in Figure 33.
DMZ and ALG window
Table 31 describes the fields in the DMZ and ALG window.
DMZ and ALG parameters
Field Description
ALG Config Select the check boxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List Choose a WAN connection from the drop-down menu
Enable DMZ Select this check box to enable DMZ on the chosen WAN connection
DMZ IP Address Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
Configure ALG.
Click Save ALG.
Configure DMZ.
3FE-47511-AAAA-TCZZA
7368 ISAM CPE A-020W-A Product Guide
Issue: 01