Security Configuration; Table 25 Qos Config Parameters - Nokia 7368 ISAM CPE Product Manual

Intelligent services access manager cpe

Table of Contents

7368 ISAM CPE A-020W-A Product Guide

Table 25

8.1.4

The A-020W-A CPE also supports security configuration, including:

•

Issue: 01

Release 05.08.01 | June 2018 | Edition 01

QoS Config parameters

Field

Description

Type

Choose a QoS service layer type from the drop-down menu, either L2 or L3.

Source MAC

Enter the source MAC.

Select the Exclude check box to exclude the source MAC

Interface

Choose an interface from the drop-down menu

DSCP Remark

Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria

802.1p Mark

Enter the value for the 802.1p (range: 0-7)

Forwarding Policy

Enter the number for the forwarding policy (range: 1-7)

Additional fields for L3

Protocol

Choose a protocol from the drop-down menu, or select the Exclude check box

Application

Choose an application from the drop-down menu

Source IP and

Enter the values for the source IP and IP mask, or select the Exclude check box

Source IP Mask

Destination IP and

Enter the values for the destination IP and IP mask, or select the Exclude check box

Destination IP Mask

Source Port and

Enter the values for the source port and port max (highest port number) or select the

Source Port Max

Exclude check box

Destination Port and

Enter the values for the destination port and port max (highest port number), or select

Destination Port Max

the Exclude check box

Choose a QoS type from the drop-down menu: L2 or L3.

Configure a QoS policy.

Click Add to add a QoS policy.

STOP. This procedure is complete.