Figure 30 Ip Filter Window; Table 28 Ip Filter Parameters - Nokia 7368 ISAM CPE Product Manual

Configure a A-020W-A
Procedure 25
1
Figure 30
Table 28
76
Release 05.08.01 | June 2018 | Edition 01
IP filter configuration
Select Security > IP filter from the top-level menu in the Ethernet Gateway window, as shown
in Figure 30.
IP filter window
Table 28 describes the fields in the IP filter window.
IP filter parameters
Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
Protocol
3FE-47511-AAAA-TCZZA
7368 ISAM CPE A-020W-A Product Guide
Description
Select this check box to enable an IP filter
Choose an IP filter mode from the drop-down menu:
•
Drop for upstream
•
Drop for downstream
Choose an internal client from the drop-down menu:
•
Customer setting - uses the IP address input below
•
IP - uses the connecting devices' IP to the device
Local IP address
Source subnet mask
Remote IP address
Destination subnet mask
Choose an application protocol or all from the drop-down menu
Issue: 01