Ethernet Network Connection; Figure 3-8 Display Module To Ethernet Network Connection - Siemens A80485-1 Quick Start Manual

_________________________________________________________________________________________________________
3.5

ETHERNET NETWORK CONNECTION

The GCP unit can be remotely accessed using an Ethernet network connection. Ethernet 1 and
Ethernet 2 ports on the Display module are generally used for such a connection, however, the
Laptop port can be used for this purpose as well using a RJ-45 to RJ-45 Ethernet cable. Set the
port to be used to the Client mode (see Section 2.4.1.5 for details or for the Laptop port see
Section 2.4.1.4), the external network will assign the Display module an IP address and
establish communications.
To
Ethernet
Network

Figure 3-8 Display Module to Ethernet Network Connection

SIG-QG-17-05
Version No.: A
DO NOT CONNECT A NETWORK TO THE LAPTOP ETHERNET
PORT IF THE PORT HAS BEEN CONFIGURED AS A SERVER,
THIS WILL CAUSE DISRUPTION TO THE NETWORK. IF A
NETWORK IS TO BE CONNECTED TO THE LAPTOP PORT,
CONFIGURE THE LAPTOP PORT DHCP AS A CLIENT.
WARNING
DISPLAY
Module
A80485-2
CPU
TX RX
POWER
1 2
Symbol ABC
4 5
GHI JKL
7 8
PQRS TUV
0
HELP
Space
ETH
PWR
ETHERNET 1 ETHERNET 2
3-7
OPERATION
(M9)
COM SEAR
TX RX TX RX
3
DEF
6
MNO
ENTER
9
WXYZ
BACK
ECHELON
USB
LAPTOP
DIAG
DECEMBER 2017