Replacing The Glass Insert - Siemens FDM243H Technical Manual

7.4 Replacing the glass insert

Building Technologies
Fire Safety
The glass insert is square-shaped and can be inserted in any direction.
Replace the glass insert as follows:
The door (1) of the manual call point is open. See the chapter 'Preparation
23]'.
1. Remove all the remains of the old glass insert.
2. Push the black retainer (2) to the right.
3. Place the new glass insert (3) under both guides (4).
4. Push the black retainer (2) to the left over the glass insert.
5. Check the function of the manual call point.
The glass insert has been replaced.
4
3
Installing the glass insert
1 Door
2 Retainer
Maintenance / Repair
Replacing the glass insert
1
3 Glass insert
4 Guides
7
2
35
A6V10374021_c_en_--
2014-07-01