Installing Riser Card - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.9.3

Installing Riser Card

To install the components, follow these steps.
1. The procedure for removal is the reverse of installation.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Install a riser Card
Stick the edge connector part of riser card and slot part on the mother board and insert them certainly.
・1st Riser card
・2nd Riser card
Note
In order to prevent damage to the server or PCI boares, ensure to unplug all power
cords before installing or removing boards.
Important
Do not touch the terminal part of PCI riser card or PCI card and the signal
pins of electric parts installed on the board. Installing boards with dirt or oil
can cause malfunction.
Express5800/R120h-1E User's Guide
1. Installing Internal Optional Devices
83