NEC Express5800 Series User Manual page 55

Chapter 2 Preparations
To install the components, follow these steps.
1. Update System Utility
Please download the latest version from our support center website. For updating System utility, please
follow the instructions on the website.
2. See steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Temporarily remove options and cables that prevent the installation of TPM.
4. Attach the TPM kit with the connector grooves on the motherboard. Press the connector in firmly and
install the TPM kit. Please check the location of the TPM connector on the motherboard by looking at the
quick reference level attached to the back of the top cover.
5. Installing the TPM cover.
Align the holes and locking latches on both sides of the TPM connector.
①
② Press down the center of the cover firm and straight until you hear a locking sound.
6. Re-attach the options and cables that were removed in step 3.
Note
If you try to remove the already attached TPM from the motherboard you will
damage the TPM cover, TPM, and motherboard. Data including that stored in TPM
key will be detected if you turn on the power the TPM that has been removed from
the original server and installed on another server.
Express5800/R120h-1E User's Guide
1. Installing Internal Optional Devices
55