Introduction - ABB CalMaster2 Instruction Manual

Field and Software Tools
CalMaster2 and CheckMaster

1 Introduction

CalMaster IRIS and CheckMaster are stand-alone verification and validation tools within the
CalMaster2 Verification Suite.
CalMaster2 tests the integrity of a flow metering system by altering a number of flow measurement
parameters and measuring the values returned from the flow measuring system. A report is
displayed that verifies the performance of the system.
A CalMaster2 verification comprises a large number of separate test routines, including:
Insulation and integrity tests of the entire flow meter system including the cables.
Transmitter gain, linearity and zero point tests.
Test of sensor magnetic properties.
Digital output test.
Analog output test.
The CalMaster IRIS/CheckMaster (see Section 1.1, page 4) test box displays the results of each test
during the testing sequence. At the end of each test, a record is stored locally within the test box.
Up to 100 test results can be stored.
Once the CheckMaster/CalMaster2 test box is connected to a PC that is running the CalMaster IRIS
software, the stored test results can be uploaded and processed.
The Windows™-based CalMaster2 IRIS software that is provided as part of the CalMaster2
package enables electronic management and printing of the test results.
The CheckMaster/CalMaster2 test box can be used with:
MagMaster
HiFlo
LoFlo
Water/Waste Water
Process hazardous Area
AquaMaster
AquaMaster fitted with MIL SPEC connectors
(hard-wired units can be upgraded – part no. WABC2024M)
AquaMaster Explorer
IM/VCM2 Issue 6
1 Introduction
3