Names Of Each Part And Connections; Basic Connections - Sanyo DSR-2004 Instruction Manual

Names of each part and connections

Rear panel

Basic connections

• Do not turn this unit on before all the connections are complete. Read the instruction manual of each unit carefully.
• Make sure each unit is connected properly as faulty connection may result in the unit emitting smoke and/or being damaged.
• Feed additional units with the same power source. Stored data may be lost.
• The DC plug of the AC adapter is very easily unplugged. When shifting this unit, remove the plug carefully.
1
1 Cooling fan (P1)
2 PTZ camera control terminal (RS-422/485: P11)
3 Audio input (AUDIO IN: CH1 - CH4)
4 Video input terminal (VIDEO IN: CH1 - CH4)
5 RS 232 terminal (RS-232C)
For maintenance purposes.
6 Network terminal (ETHERNET: P5)
7 External sensor terminal (SENSOR/ALARM OUT: P14)
8 Audio output terminal (AUDIO OUT)
9 Video output terminal (VIDEO OUT)
F VGA (Video Graphics Array) output terminal
Connects to the PC VGA monitor.
G System changeover switch (PAL/VGA: P7)
2
6 7
To audio input terminal
Speaker with
built-in amplifier
(Sold separately)
Camera
(Sold separately)
3
4
8
9
To video input terminal
Video monitor
(Sold separately)
H DC12V input terminal (DC 12V)
Connect the power cable to the unit as shown in the
illustration and insert the power plug into the outlet. The
POWER indicator situated on the front panel blinks.
to AC
Monitor
(Sold separately)
5 F
MENU AUTO MODE
G H
POWER
4