Sanyo DSR-M810P Service Manual

SERVICE MANUAL

Digital Video Recorder

CONTENTS
NOTES ON HANDLING INTERNAL HARD DISK DRIVE
COMPONENTS ........................................................................ 3
SPECIFICATIONS .................................................................... 4
1. DISASSEMBLY .................................................................... 5
2. RESETTING THE USE TIME ............................................... 6
3. ADJUSTMENT ...................................................................... 6
4. PARTS LIST .......................................................................... 9
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS ........... C1
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE: 1. Parts order must contain model number, part number, and description
2. Substitute parts may be supplied as the service parts.
3. N.S.P. : Not available as service parts.
4. Regardless from the unit's specification the HDD may have a different capacity or there might be more than one
HDD installed.
Even with the same product number the HDD installed might have a different capacity, or there might be either
one or two HDD installed.
Design and specifications are subject to change without notice.
L8HAE/XE
PRODUCT SAFETY NOTICE
FILE NO.
DSR-M810P
(Product Code : 175 811 28) (without HDD)
(Europe)
(U.K.)
(PAL General)
REFERENCE No.SM5310588