A Setting The Television System And The Monitor Output; B Setting The Clock (Clock Set) - Sanyo DSR-2004 Instruction Manual

Pre-operation preparation
Setting the television system and the monitor
A
output
If the television system of the camera to be connected and
the type of monitor differ, live videos cannot be monitored on
the normal screen. Check the specifications of the equipment
to be connected and set the system changeover switch on the
rear panel.
• Do not forget to turn off the power when adjusting the
settings.
b Matching the television system of the camera (PAL)
Up: When using a NTSC camera
Down: When using a PAL camera
Cannot be used when PAL and NTSC system are mixed.
b Selecting the type of monitor (VGA)
Up: When connecting the general monitor to the video
output terminal
Down: When connecting a PC monitor to the VGA
terminal
The VGA terminal and the video output terminal cannot
be used simultaneously.
7
2
P V
A G
L A
1 2
P V
A G
L A
1 2
MENU AUTO MODE POWER
B
Setting the clock (CLOCK SET)
1
Press the MENU button.
The PASSWORD input screen is displayed.
• To return to the previous screen, press the EXIT/
STOP button.
2
Press the button 1 four times to enter "1111" and
press the ENTER button.
The MAIN MENU screen is displayed.
• "1111" is the factory default setting password. We
recommend you change the password to avoid
unauthorized use. (P30)
1
NETWORK
1 8
3 7
2% 2006/07/14 08:06:09
PASSWORD
- - - -
CH1
2% 2006/07/14 08:06:09
PASSWORD
* * * *
- - - -
CH1
MAIN MENU
LIVE RECORD SYSTEM
HDD SET SERVICE